carpeting stairs::Many diy enthusiasts worry about damaging expensive material when carpeting stairs but this challenging job is easy to master carpeting stairs

carpeting stairs::Many diy enthusiasts worry about damaging expensive material when carpeting stairs but this challenging job is easy to master.
Stairs are usually a high traffic area so opt for closewoven carpets.
Deeper piles tend to get treadworn fairly quickly, leaving squashed areas on the carpet which make them unsightly.
Lighter carpet shades can discolor quickly through wear and tear.
Choose a heavy duty underlay that is designed for high traffic areas.
Underlay is not only made to cushion the carpet and protect it from the wear against the hard wood of the stairs but it is also a great sound insulator.
The better quality you opt for, the less noisy it will seem when people are running up and down the stairs.
Remove them with a claw hammer so that your underlay and carpet will sit on a snagfree surface.
Measure the width of the stairs as well as the size of the tread and the riser.
Add a further 3 inches for every riser and every tread.
Work from the top step down to the bottom one to remove all slack areas.
Stapling carpet edges use a staple gun loaded with heavy duty staples to attach carpet edges to the underside of the stair lip.
Staples will help to keep each tread secure.
It may seem like a quick way to do the job but it is ineffectual and will leave your stairway in a dangerous condition.
A single length of carpet is only practical if the carpet is of the stair runner variety and held in place by rods.
carpeting stairs::