carpet installation stair::The article below will help you through the process.If you have a little laying experience, carpeting stairs is something you can easily accomplish on your own.
When engaged within the carpet installation project, be sure to place your safety as a key factor.
Keep an eye out for anything that might pose an issue and take care of these issues as they become apparent.
Center tackless strips on the backside of each individual stair tread and roughly an inch from the back vertical of the stair tread.
Repeat this process on each and every stair that you will be carpeting.
Repeat this process on each and every stair that will be carpeted.
These pads should be long enough to cover the area starting at the front the the tackless strip on the horizontal side to the very top of the tackless strip that is affixed to the vertical side.
You should try and make each staple roughly six inches from the others.
Tacks should be secured every four inches or so.
Once the first step is good to go, the rest will come together rather easily.
The material should be brought forward just enough to secure it to the strip at the horizontal point of the first stair.
Try your best to avoid pressing the material back into the nose of the tread on the step.
You will need to secure the material at the top of the final stair with a series of staples, installed roughly four inches from one another.
Use a vacuum to make sure that many loose materials are collected and disposed of.
This will allow you to sit back and relax while ensuring that the job gets completed the way you envisioned.
carpet installation stair::Maybe you are considering carpet, hardwood
floors, or a runner carpet installation stair
No comments:
Post a Comment