Monday, April 16, 2012

husqvarna fairing

husqvarna fairing in Ride-on Mowers Buy UK

husqvarna fairing

husqvarna fairing Ride-on Mowers Buy UK

husqvarna fairing Ride-on Mowers Buy UK.Once again there are no bolt on kit tanks for the husqvarna te 449.
Safari tanks provided a 3.
I have seen pictures of the tank adapted to the 449 but no detail on how it was accomplished.
So once again we had to fabricate custom mounts.
The tank only made contact with about a quarter inch of the airbox leaving the weight to be carried by the mounts we still needed to fabricate.
No easy way to measure the gap so we got a little creative.
Sandwich it between the tank and frame rails, take some measurements and time for some machining.
The results is a nicely machined delrin spacer.
Next the mounting brackets.
The kit brackets mount to the top subframe bolts and the lower frame rail of the bmw.
We were able to use the kit bracket with some reshaping, mounting it to the te subframe pickups required machining new spacers a the husky frame is considerably more narrow at this point than the bmw frame.
With no frame rail close to the front pickup point we decided to make arms coming up off the bracket that will connect to a cross brace clamped to the internal frame spars.
There is minimal clearance between the bracket and airbox.
New spars connect the bracket to the kit bracket.
The weight of the gas tank now sits on the frame mounted block and attaches at two points on each side.
The tank will need to be removed daily for air filter servicing.
To remove all that is necessary is to remove two bolts on each side and the tank lifts right off.
Ï»¿ once again thither are no dash along kit tanks for the husqvarna te 449.
We were capable to apply the outfit bracket with some reshaping mounting it to the te subframe pickups required machining new spacers a the husky frame is considerably more narrow at this point than the bmw frame.
Ï»¿ we were capable to apply the outfit bracket with some reshaping mounting it to the te subframe pickups required machining new spacers a the husky frame is considerably more narrow at this point than the bmw frame.. husqvarna fairing husqvarna fairing

No comments: